HDMI Series
AsiaLink International Technology Corporation is an electrical connector manufacturer that designs and manufactures a wide variety of electrical connectors. These connectors include, but are not limited to, USB Connectors, IEEE1394 Connectors, DVI Connectors, ATA Connectors, Cat5E Connectors, RF connectors, Cell Phone connectors, PDA Cradle Connectors, High-Speed connectors, D-sub connectors, SCSI connectors, custom designed connectors and many others, both in board and cable mount versions. one of our key competitive advantages is our ability to quickly design and produce the molds required for our manufacturing operations. Due to these efficient processes, our lead times and costs associated with tooling are typically much lower than those of our competitors. All of our connectors are manufactured in DongGuan,China, at ISO9001 Certified facilities. This gives us the ability to supply a large variety of equivalent Asian electrical connectors, while maintaining quality, and keeping a lower cost structure.
HDMI 19PIN AF /SMT, Shell / DIP 180° With Screw Hole

HDMI 19PIN AF /SMT, Shell / DIP 180° With Screw Hole, OEM/ODM orders are welcome

Model: ASA7-HDMI0008

Material:
Housing: glass filled heat-resistant resin, UL94V-0
Terminal: copper alloy, 0.2T
Shield: copper alloy, 0.5T
 

 

Terminal:
(Contact area) 15u-inch gold over 50u-inch nickel plated
(Solder tail area) 1u-inch gold over 50u-inch nickel plated
Shell plating: 100u-inch nickel plated
Mechanical characteristics:
Insertion force: 44.1N maximum
Extraction force: 9.8N minimum and 39.2N maximum
Motion cycle: 5,000 cycles
Contact pull out force: 5.9N/pin minimum
Electrical characteristics:
Rating current : 0.5A
Rated voltage: 40V
Contact resistance: 30Ω maximum
Unmated: 100MΩ minimum at 500V DC
Mated: 100MΩ minimum at 150V DC
Dielectric withstanding voltage: 300V AC/1 minute
Operating temperature: -20 to 85°C
Storage temperature: -20 to 65°C
Operation/storage humidity: 95% or less
Should be connected with frame ground
OEM and ODM orders are welcome
 
Certification by ISO9001 Standards
Explain
Because AsiaLink International Technology Corporation is a connector components manufacturer, one of our key competitive advantages is our ability to quickly design and produce the molds required for our manufacturing operations. Due to these efficient processes, our lead times and costs associated with tooling are typically much lower than those of our competitors. All of our connectors are manufactured in China and Taiwan at ISO9001 Certified facilities. This gives us the ability to supply a large variety of equivalent China and Taiwan electrical connectors, while maintaining quality, and keeping a lower cost structure.
AsiaLink International Technology Corporation has the ability to design and manufacture many types of connectors for very fine pitch applications. Many of these models are available as board mount or cable mount connectors.
All AsiaLink International Technology Corporation products are 100% inspected and electronically tested.